Faceted Green Fluorite Quartz Bracelet

By on May 28, 2011

A Faceted Green Fluorite Quartz Bracelet that will make you the envy of all who lay eyes on this beautiful fancy cut quartz bracelet.

fluorite quartz bracelet Faceted Green Fluorite Quartz Bracelet


Jewelry Making Supplies:

1. 23 Faceted Green Fluorite Quartz in fancy-cut.
2. 24 micro silver round beads.
3. 7 silver headpins
4. 10 inches bead wire
5. 2 silver crimps
6. a set of plain silver round clasp
7. pliers and cutters

Jewelry Making Instructions:

1. Prepare 7 Faceted Green Fluorite Quartz using the 7 silver headpins. (Refer to Basic Techniques to prepare these.)

2. Put aside.

3. Insert a crimp onto the bead wire.

4. Insert bead wire into the loop on one part of the clasp and slip the wire back into the crimp and pull tight leaving 1 inch of wire.

5. Use flat-nosed pliers to press hard on both sides of crimp to flatten it.

6. Insert green fluorite quartz into the wire followed by a silver round bead. Then another green fluorite quartz followed by another silver round bead again.

7. After every 2 green fluorite quartz followed by a silver round bead, add a prepared green fluorite quartz on a headpin.

8. Continue till all are used up.

9. Make sure that the length is at least 7 inches long. (That’s the length for most people)

10. Finished off this Faceted Green Fluorite Quartz bracelet with a round silver bead and then add a crimp.

11. Insert end of wire to the loop of the clasp bit and back into the crimp and tighten.

12. Flatten both sides of crimp with the flat-nosed pliers and slip the rest of the wire into the last few beads and quartz.

(Refer to Attaching Clasps to learn how to begin and finish a bracelet or necklace.
Now add this lovely faceted green fluorite quartz bracelet to your collection of colored gemstone jewelry.